Nuwave OxyPure Zero Smart Air Purifier
Overview
Breathe easy with OxyPure Zero’s dual 4-stage filtration, built-in air quality and odor sensors, Wi-Fi capabilities and convenient operating modes.
Purify Extra Large Spaces Up To 2,002 Sq Ft
Quickly clean the air in areas as large as 1,001 sq ft in 30 minutes, or 2,002 sq ft in an hour
Dual 4-Stage Filtration System Captures 99.99%** of Airborne Pollutants
Two sets of long-lasting, reusable filters deliver pure, clean air more efficiently than old, outdated HEPA filters, capturing up to 99.98%* of airborne E. coli bacteria and up to 99.99%** of airborne H3N2 influenza virus.
Patented Bio-Guard Technology
Advanced Bio-Guard technology utilizes electrostatic precipitation to trap 100% of airborne particle pollutants and irritants as small as 0.1 microns.
This cutting-edge technology is 66% more efficient than old HEPA technology and is made to last, requiring no filter replacements, saving you money and minimizing waste.
Air Quality Control On The Go
Connect the OxyPure Zero to your Wi-Fi network and use your smartphone to monitor your air quality and adjust the fan speed from anywhere.
Air Quality & Odor Sensors
Built-in particle sensors communicate air quality and odors levels in real time using bright, color-coded indicator lights.
Convenient Operating Modes
Eco, Auto, Ultimate Clean, Turbo and Sleep modes offer unbeatable versatility available in a user-friendly control panel, ensuring you get the perfect purification to suit your needs.
Backed By Professionals
“If you have breathing issues or allergies that are aggravated by dust, pet dander, mold or pathogens, a powerful air purifying system is an important first step…I like OxyPure because it not only removes the particulates like pollen, pet dander, and smoke, OxyPure removes…viruses like influenza and bacteria like staph.”
- Dr. David Fost
CARB & Energy Star Certified
OxyPure Zero meets the standards for the California Air Resources Board (CARB) and the EPA’s Energy Star initiative.
Details
Dimensions(L x W x H) | 13.5 x 12 x 22.75 in |
Weight | 21.5 lbs |
Voltage | 120 V |
This setting allows the Nuwave OxyPure Zero Air Purifier to react automatically based on air quality, engaging the fan at Speed 3 when Level 3 air quality is detected.
This energy-saving function is similar to the Auto Function in that it allows the OxyPure Zero to remain off until poor air quality is detected. Once poor air quality is detected, the unit goes into Auto Mode and works until the air quality is back to good air quality, and then it shuts off.
This is another energy-saving mode during which the OxyPure Zero fan operates constantly on Speed 1 as long as the air quality is good, increasing to Speed 6 at the first hint of poor air quality or odor, and then returning to Speed 1 once air quality is restored.
This mode will turn off the Nuwave OxyPure Zero’s indicator lights, and automatically adjusts the fan speed to maintain air quality while minimizing noise.
Simply follow these steps:
- Clean the exterior with a cloth or paper towel. If there is any type of build-up, use a damp cloth. Do not use any harsh abrasives or cleaning pads on any part of the unit.
- Clean the air quality sensor that is on the right of the unit. Remove the cover and use cloth or paper towel to remove any build-up, dust, etc.
- Clean the odor sensor grill opening that is on the right side of the unit with a soft cloth. Do not spray anything in or around the odor sensor grill.
- Clean/Change the filters as follows:
- Open the Filter Slot Cover
- Remove filters that require cleaning or replacement
- To clean the Stainless-Steel Pre-Filter, remove any dust or lint with a paper towel or vacuum, then clean with warm, soapy water. Rinse thoroughly and dry the filter before reinstalling it into the OxyPure Zero.
- To clean the Bio-Guard filter, spray it with a mild degreaser and allow it to sit for 2-3 minutes. Submerge the filter in warm water, shake and remove. Repeat this process until the filter is clean. Rinse with warm water and allow it to dry completely before reinstalling it into the OxyPure Zero.
*Tested on E. coli bacteria, Staphylococcus Albus bacteria, Staphylococcus Aureus bacteria, and Aspergillus Niger bacteria and found a 99.98%, 99.96% and 99.97% removal rate respectively within two hours in a 30 m3 chamber at maximum wind speed.
**Tested on H3N2 influenza virus and found a 99.99% removal rate within one hour in a 10m3 test chamber.